The Magnetic Speed Sensor detects when ring gear teeth, or other ferrous projections, pass the tip of the sensor. Electrical impulses are produced by the sensor’s internal coil and sent to the speed control unit. The signal from the magnetic speed sensor, teeth per second (Hz.), is directly proportional to engine speed. Speed sensors are available in various lengths in both U.S. and metric threads. Wire leads, military connectors, automotive connectors or stud terminals are also available. Over 15 styles currently available.
| P/N | Description |
| 5/8 – 18 UNF Threaded | |
| MSP674 | 3” w/o Matting Half Connector / High Output |
| MSP675 | 3” w 7” Leads |
| MSP676 | 5” w 12” Leads |
| MSP677 | 3” w/o Mating Half Connector |
| MSP678* | 5” w/o Mating Half Connector |
| MSP679* | 3” Mating Half Connector / Weather Boot |
| MSP6710* | 5” Mating Half Connector / Weather Boot |
| MSP6719 | 2.375” w 6” Leads |
| MSP6720 | 4” w 6” Leads |
| MSP6721 | 3” w Automotive Connector |
| MSP6721C | 3" w Automotive Connector / Mating Half Connector |
| MSP6728 | 3" Length / Packard Connector |
| MSP6728C | 3” Length / Packard Connector / Mating Half Connector |
| MSP6732 | 3” Length / Dual Output / Dual Packard Connectors |
| MSP6732C | 3” Length / Dual Output / Dual Packard Connectors / Mating Half Connector |
| 3/8 – 24 UNF Threaded – 6’ Shielded Cable | |
| MSP6729 | 2.5” |
| MSP6730 | 1.5” |
| MSP6731 | 4” |
| MSP6736 | 1.2” |
| 3/4 - 16 UNF Threaded – 3.5” Length | |
| MSP6724 | Automotive Connector |
| MSP6724C | Automotive Connector / Mating Half Connector |
| MSP6734 | 4" Leads |
| MSP6735 | 4" Leads / Packard Connector |
| M16 x 1.5 Threaded - 3" Length | |
| MSP6714 | No Mating Half Connector |
| MSP6715 | Mating Half Connector / Weather Boot |
| MSP6723 | Automotive Connector |
| MSP6723C | Automtive Connector / Mating Half Connector |